Nftables Mailserver

Aus Tutorials
Version vom 16. Juli 2023, 12:05 Uhr von Martin Kirner (Diskussion | Beiträge)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen

Stand 16.07.2023

#!/usr/sbin/nft -f

flush ruleset

include "/etc/nftables/fail2ban.conf"

table inet filter {
  set internal_networks_ip4 {
    type ipv4_addr
    flags interval
    auto-merge
    elements = { 10.2.0.0/24, 10.3.0.0/24, 10.0.0.0/24, 10.8.4.0-10.8.8.255 }
  }

  chain input {
    type filter hook input priority 0; policy drop;

    # established/related connections
    ct state established,related accept;

    # loopback interface
    iifname lo accept;

    # icmp (ping)
    iifname "wlan0" icmp type echo-request accept;
    iifname "tun0" icmp type echo-request accept;
    iifname "eth0" ip daddr { 212.186.198.11 } icmp type echo-request accept;
    iifname "eth1" icmp type echo-request accept;

    # open sshd (22) for internal networks only
    tcp dport { ssh } ip saddr @internal_networks_ip4 accept comment "accept SSH from internal networks"

    # open tcp ports: http (80), https (443)
    tcp dport { http, https } accept;

    # open udp ports: domain (53), openvpn (1194)
    udp dport { domain, openvpn } accept;

    # mail ports: pop3 (143), imap (110), submission (SMTP/587), smtp (25), doveadm (47111)
    tcp dport { pop3, imap2, submission, smtp, 47111 } accept;
    udp dport { imap2 } accept;

    # mysql (3306)
    meta l4proto { tcp, udp } @th,16,16 { 3306 } ip saddr @internal_networks_ip4 accept comment "accept mysql from internal networks";

    counter comment "count dropped packets"
    #log
  }

  chain forward {
    type filter hook forward priority 0; policy drop;

    ip saddr @internal_networks_ip4 accept;
    iifname "wlan0" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "tun0" ct state related,established accept;
    iifname "eth1" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "wlan0" ct state related,established accept;
    iifname "eth0" oifname "eth1" ct state related,established accept;
  }

  chain output {
    type filter hook output priority 0; policy accept;
  }
}

# NAT
table ip nat {
  chain prerouting {
    type nat hook prerouting priority 0; policy accept;
  }

  # for all packets to WAN, after routing, replace source address with primary IP of WAN interface
  chain postrouting {
    type nat hook postrouting priority 100; policy accept;
    oifname "wlan0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.0.0.0/24 masquerade;
    oifname "eth1" ip saddr 10.8.4.0/24 masquerade;
  }
}

Stand 28.11.2020

#!/usr/sbin/nft -f

flush ruleset

include "/etc/nftables/fail2ban.conf"

table inet filter {
  set internal_networks_ip4 {
    type ipv4_addr
    flags interval
    auto-merge
    elements = { 10.2.0.0/24, 10.0.0.0/24, 10.8.4.0/24 }
  }

  chain input {
    type filter hook input priority 0; policy drop;

    # established/related connections
    ct state established,related accept;

    # loopback interface
    iifname lo accept;

    # icmp (ping)
    iifname "wlan0" icmp type echo-request accept;
    iifname "tun0" icmp type echo-request accept;
    iifname "eth0" ip daddr { 212.186.198.11 } icmp type echo-request accept;
    iifname "eth1" icmp type echo-request accept;

    # open sshd (22) for internal networks only
    tcp dport { ssh } ip saddr @internal_networks_ip4 accept comment "accept SSH from internal networks"

    # open tcp ports: http (80), https (443)
    tcp dport { http, https } accept;

    # open udp ports: domain (53), openvpn (1194)
    udp dport { domain, openvpn } accept;

    # mail ports: pop3 (143), imap (110), submission (SMTP/587), smtp (25), doveadm (47111)
    tcp dport { pop3, imap2, submission, smtp, 47111 } accept;
    udp dport { imap2 } accept;

    # mysql (3306)
    meta l4proto { tcp, udp } @th,16,16 { 3306 } ip saddr @internal_networks_ip4 accept comment "accept mysql from internal networks";

    counter comment "count dropped packets"
    #log
  }


  chain forward {
    type filter hook forward priority 0; policy drop;

    ip saddr @internal_networks_ip4 accept;
    iifname "wlan0" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "tun0" ct state related,established accept;
    iifname "eth1" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "wlan0" ct state related,established accept;
    iifname "eth0" oifname "eth1" ct state related,established accept;
  }

  chain output {
    type filter hook output priority 0; policy accept;
  }
}

# NAT
table ip nat {
  chain prerouting {
    type nat hook prerouting priority 0; policy accept;
  }

  # for all packets to WAN, after routing, replace source address with primary IP of WAN interface
  chain postrouting {
    type nat hook postrouting priority 100; policy accept;
    oifname "wlan0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.0.0.0/24 masquerade;
    oifname "eth1" ip saddr 10.8.4.0/24 masquerade;
  }
}

Stand 17.8.2020

#!/usr/sbin/nft -f

flush ruleset

include "/etc/nftables/fail2ban.conf"

table inet filter {
  set internal_networks_ip4 {
    type ipv4_addr
    flags interval
    auto-merge
    elements = { 10.2.0.0/24, 10.0.0.0/24, 10.8.4.0/24 }
  }

  chain input {
    type filter hook input priority 0; policy drop;

    # established/related connections
    ct state established,related accept;

    # loopback interface
    iifname lo accept;

    # icmp (ping)
    iifname "wlan0" icmp type echo-request accept;
    iifname "tun0" icmp type echo-request accept;
    iifname "eth0" ip daddr { 212.186.198.11 } icmp type echo-request accept;

    # open sshd (22) for internal networks only
    tcp dport { ssh } ip saddr @internal_networks_ip4 accept comment "accept SSH from internal networks"

    # open tcp ports: http (80), https (443)
    tcp dport { http, https } accept;

    # open udp ports: domain (53), openvpn (1194)
    udp dport { domain, openvpn } accept;

    # mail ports: pop3 (143), imap (110), submission (SMTP/587), smtp (25), doveadm (47111)
    tcp dport { pop3, imap2, submission, smtp, 47111 } accept;
    udp dport { imap2 } accept;

    # mysql (3306)
    meta l4proto { tcp, udp } @th,16,16 { 3306 } ip saddr @internal_networks_ip4 accept comment "accept mysql from internal networks";

    counter comment "count dropped packets"
    #log
  }

  chain forward {
    type filter hook forward priority 0; policy drop;

    ip saddr @internal_networks_ip4 accept;
    iifname "wlan0" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "wlan0" ct state related,established accept;
  }

  chain output {
    type filter hook output priority 0; policy accept;
  }
}

# NAT
table ip nat {
  chain prerouting {
    type nat hook prerouting priority 0; policy accept;
  }

  # for all packets to WAN, after routing, replace source address with primary IP of WAN interface
  chain postrouting {
    type nat hook postrouting priority 100; policy accept;
    oifname "wlan0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.0.0.0/24 masquerade;
  }
}

Stand 17.04.2020

#!/usr/sbin/nft -f

flush ruleset

include "/etc/nftables/fail2ban.conf"

table inet filter {
  set internal_networks_ip4 {
    type ipv4_addr
    flags interval
    auto-merge
    elements = { 10.2.0.0/24, 10.0.0.0/24, 10.8.4.0/24 }
  }

  chain input {
    type filter hook input priority 0; policy drop;

    # established/related connections
    ct state established,related accept;

    # loopback interface
    iifname lo accept;

    # icmp (ping)
    iifname "wlan0" icmp type echo-request accept;
    iifname "tun0" icmp type echo-request accept;
    iifname "eth0" ip daddr { 212.186.198.11 } icmp type echo-request accept;

    # open sshd (22) for internal networks only
    tcp dport { ssh } ip saddr @internal_networks_ip4 accept comment "accept SSH from internal networks"

    # open tcp ports: http (80), https (443)
    tcp dport { http, https } accept;

    # open udp ports: domain (53), openvpn (1194)
    udp dport { domain, openvpn } accept;

    # mail ports: pop3 (143), imap (110), submission (SMTP/587), smtp (25), doveadm (47111)
    tcp dport { pop3, imap2, submission, smtp, 47111 } accept;
    udp dport { imap2 } accept;

    # mysql (3306)
    meta l4proto { tcp, udp } @th,16,16 { 3306 } ip saddr @internal_networks_ip4 accept comment "accept mysql from internal networks";

    counter comment "count dropped packets"
    #log
  }


  chain forward {
    type filter hook forward priority 0; policy drop;

    ip saddr @internal_networks_ip4 accept;
    iifname "wlan0" oifname "tun0" ct state related,established accept;
    iifname "eth0" oifname "tun0" ct state related,established accept;
  }

  chain output {
    type filter hook output priority 0; policy accept;
  }
}

# NAT
table ip nat {
  chain prerouting {
    type nat hook prerouting priority 0; policy accept;
  }

  # for all packets to WAN, after routing, replace source address with primary IP of WAN interface
  chain postrouting {
    type nat hook postrouting priority 100; policy accept;
    oifname "wlan0" ip saddr 10.8.4.0/24 masquerade;
    oifname "eth0" ip saddr 10.8.4.0/24 masquerade;
  }
}


Zurück zu nftables

Abgerufen von „https://tutorials.kirner.or.at/tutorials/index.php?title=Nftables_Mailserver&oldid=10987“