OpenVPN (Ubuntu 16.04)

Aus Tutorials
Zur Navigation springen Zur Suche springen

Installation

Um die Installation anzuzeigen bitte aufklappen

sudo apt-get install openvpn easy-rsa 

Ordner zur Schlüsselerzeugung kopieren:

sudo cp -r /usr/share/easy-rsa /etc/openvpn/easy-rsa2 

Konfiguration

Um die allgemeine Konfiguration anzuzeigen bitte aufklappen

Beispiele

/usr/share/doc/openvpn/examples/

Schlüssel und Zertifikate generieren

Variablen anpassen

In das RSA-Verzeichnis wechseln:

cd /etc/openvpn/easy-rsa2/

Die Datei /etc/openvpn/easy-rsa2/vars anpassen:

sudo nano vars

Am Ende folgenden Alias-Eintrag hinzufügen:

export KEY_ALTNAMES="Irgendwas"

Weitere Vorbereitungen

Schlüssel-Verzeuchnis anlegen:

sudo mkdir /etc/openvpn/easy-rsa2/keys 

Neueste openssl-X.X.X.cnf kopieren:

sudo cp openssl-1.0.0.cnf openssl.cnf

Datei vars in die Umgebungsvariablen aufnehmen:

source ./vars 

Schlüssel erzeugen

sudo -E ./clean-all
sudo -E ./build-ca 

Server Zertifikat und Schlüssel erstellen (Common Name sollte DNS-Name sein):

sudo -E ./build-key-server server 

Benutzerschlüssel anlegen:

  • Common Name ist der Name, mit dem ein Client später identifiziert wird (kein DNS-Name).
  • Bei Meldung TXT_DB error number 2 einen anderen Common Name verwenden (wurde schon verwendet).
sudo -E ./build-key ersterClient
sudo -E ./build-key zweiterClient
...

Diffie-Hellman-Parameter generieren:

sudo -E ./build-dh 

Client-Schlüssel in eine Datei packen:

tar -cf ersterClient.tar ersterClient.key ersterClient.crt ca.crt

Client Konfiguration

Um die Client-Konfiguration anzuzeigen bitte aufklappen

Beispiel einer client.conf-Konfigurationsdatei

##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
# On Windows, you might want to rename this  #
# file so it has a .ovpn extension           #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote <ip or dns name> 10000

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
ca ./keys_linux_server/ca.crt
cert ./keys_linux_server/server.crt
key ./keys_linux_server/server.key

# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server".  This is an
# important precaution to protect against
# a potential attack discussed here:
#  http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server".  The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
cipher AES-256-CBC

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

pull

auth SHA1

auth-user-pass

Route hinzufügen

Wenn der OpenVPN-Server so konfiguriert wurde, dass das dahinterliegende Netzwerk erreicht werden kann, dann müssen die erreichbaren Rechner, in dem dahinterliegenden Netzwerk, die Route zurück zum Server kennen. Andernfalls schlägt die Verbindung fehl, weil die Pakete den Weg zurück nicht finden.

Falls möglich, sollte man die Route beim Router hinterlegen. Falls dies jedoch nicht möglich ist, muss bei jedem Rechner direkt eine Route hinterlegt werden.

Dazu in der Datei /etc/network/interfaces/ folgende Zeile hinzufügen:

# Add persitent route command
post-up route add -net <network> netmask 255.255.255.0 gw <openvpn server> metric 1

Beispiel:

post-up route add -net 10.9.0.0 netmask 255.255.255.0 gw 10.0.0.100 metric 1

Gesetzte Routen anzeigen lassen:

netstat -r

Masquerade hinzufügen

Der Client-Internetverkehr kann mittels folgender Zeile (in der server.conf) vollständig über den VPN-Server geleitet werden:

push "redirect-gateway def1 bypass-dhcp"

Damit der externe Netzverkehr funktioniert, muss in der Datei /etc/network/interfaces/ (auf dem VPN-Server) folgende Zeile hinzufügt werden:

up iptables -t nat -A POSTROUTING -s 10.8.1.0/24 -o eth0 -j MASQUERADE

Client GUI

OpenVPN-GUI installieren (falls nicht vorinstalliert):

sudo apt-get install network-manager-openvpn network-manager-openvpn-gnome

Danach die Datei xxxxxx.ovpn mittels Gespeicherte VPN-Konfiguration importieren... hinzufügen.

Siehe auch https://torguard.net/knowledgebase.php?action=displayarticle&id=53

Probleme

DNS-Umleitung funktioniert nicht unter Ubuntu 16.04

Dazu im Network Manager die Methode Automatisch (DHCP) auf Automatisch (DHCP), nur Adressen umstellen. Danach müssen die DNS-Server, die verwendet werden sollen, wenn keine OpenVPN-Verbindung besteht, angegeben werden.

Networkmanager IPv4-Settings

Server Konfiguration

Um die Server-Konfiguration anzuzeigen bitte aufklappen

IPV4-Weiterleitung aktivieren

Siehe dazu Netzwerk einrichten (Linux)

Benutzer openvpn anlegen

Zur Erhöhung der Sicherheit wird der Server mit dem Benutzer openvpn ausgeführt.

Zum Anlegen eines systemspezifischen Benutzers siehe User Administration

Beispeil einer server.conf-Konfigurationsdatei

#################################################
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
local 10.0.0.101

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port 10000

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ./easy-rsa2/keys/ca.crt
cert ./easy-rsa2/keys/server.crt
key ./easy-rsa2/keys/server.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys. 
dh ./easy-rsa2/keys/dh2048.pem

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# In subnet topology, the tun device is configured
# with an IP and netmask like a "traditional" 
# broadcast-based network.
topology subnet

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
push "route 10.0.0.0 255.255.255.0"

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 10.0.0.101"
;push "dhcp-option DNS 208.67.220.220"

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC        # Blowfish (default)
cipher AES-256-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES

# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user openvpn
group openvpn

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
;log         openvpn.log
log-append  openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

tls-server
auth SHA1

script-security 3 execve
auth-user-pass-verify checklogin.sh via-env

# This directive sets a client configuration directory,
# which the OpenVPN server will scan for every 
# incomming connection, searching for a client specific
# configuration file.
client-config-dir ccd

Script checklogin.sh

cd /etc/openvpn/
sudo nano checklogin.sh
#!/bin/bash
# zur Sicherheit

if [ "$username" == "" -o "$password" == "" ] ; then
  exit 1
fi

# Username und Passwort werden zusammengesetzt
USER_PASS="$username:$password"

# der Eintrag wird in der Datei users gesucht
cat ./users | grep $USER_PASS > /dev/null

# wenn grep den Eintrag gefunden hat, ist der Exitcode 0
exit $?

Besitzer ändern und ausführbar machen:

sudo chown openvpn:openvpn checklogin.sh
sudo chmod a+x checklogin.sh

Inhalt der Datei users

sudo nano users
Benutzer:Passwort
<user name>:<password>
sudo chown openvpn:openvpn users

client config dir (ccd)

Mit einer Datei im client config dir-Verzeichnis kann man einem Client eine statische IP-Adresse zuordnen

Zuerst ein Verzeichnis anlegen (muss mit der Direktive client-config-dir übereinstimmen), wo alle Dateien abgelegt werden:

cd /etc/openvpn/
sudo mkdir ccd

Danach eine Datei mit der Angabe Common Name beim Benutzerschlüssel anlegen:

sudo nano ccd/<common name>

Und folgenden Inhalt eintragen:

ifconfig-push <ip address> <net mask>

z.B.

ifconfig-push 10.8.0.8 255.255.255.0

Verbindungsaufbau über Terminal

Um den Verbindungsaufbau über ein Terminal anzuzeigen bitte aufklappen

Konfigurationen unter /etc/openvpn/clients/ hinterlegen.


Verbindung aufbauen:

#!/bin/sh

#check if profile has been passed
[ -z $1 ] && echo "Usage: ${0} <client>..." && exit 1;

openvpn --script-security 2 --config /etc/openvpn/clients/${1}.ovpn --auth-user-pass /etc/openvpn/clients/login.conf &

# check if call was successful
[ $? -ne 0 ] && echo "Failed to connect to VPN server using ${1}.ovpn... && exit 1;

Verbindung trennen:

#!/bin/sh

#check if profile has been passed
if [ -z $1 ] && echo "Usage: ${0} <client>..." && exit 1;

kill `sudo pgrep -fl ${1}.ovpn | grep openvpn | cut -d ' ' -f 1`

# check if kill was successfull
if [ $? -ne 0 ] && echo "Failed to disconnect from VPN Server using ${1}.ovpn..." && exit 1;

Links

http://forums.openvpn.net/topic7410.html


Zurück zu OpenVPN