NETGEAR DGN2200M-100PES (OpenWRT)

Aus Tutorials
Zur Navigation springen Zur Suche springen

Noch in Bearbeitung


Voraussetzungen

Annex A

http://www.a1community.net/t5/Festnetz-Hardware/Annex-A-oder-Annex-B/td-p/19442

Installation über die Serielle Schnittstelle

https://wiki.openwrt.org/doc/hardware/port.serial


Kabel

https://wiki.openwrt.org/doc/hardware/port.serial.cables

Stiftleisten

https://www.conrad.at/de/stiftleisten-buchsenleisten-o0224620.html

tftpd-Server

http://www.netzwelt.de/download/11795-tftpd32.html

http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/

https://www.symantec.com/connect/articles/install-open-tftp-server-deployment-solution-71

Minicom

https://help.ubuntu.com/community/Minicom

Downloads

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin

Konfiguration

Zusätzliche Pakete können unter https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ runtergeladen werden.

ADSL Modem

ADSL Modem

Links

https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5

https://wiki.openwrt.org/doc/howto/internet.connection

https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1

https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149

https://johannes.truschnigg.info/blog/2015-12-07

GW7300SeriesUserManual.pdf

Probleme

Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48
Tue Mar  1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
Inhalt von /etc/config/interfaces
V1
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'

config adsl_device 'adsl'
        option fwannex 'a'
        option annex 'a'

config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '<user name>'
        option password '<password>'
        option demand '0'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'
V2
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'

config atm-bridge 'atm'
        option encaps 'vc'
        option payload 'bridged'
        option vci '48'
        option vpi '8'

config dsl 'dsl'
        option xfer_mode 'atm'
        option line_mode 'adsl'
        option annex 'a'

config interface 'wan'
        option ifname 'nas0'
        option proto 'pppoa'
        option ipv6 'auto'
        option username '<user name>'
        option password '<password>'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'

Links

https://wiki.openwrt.org/toh/hwdata/netgear/netgear_dgn2200_v1

https://wiki.openwrt.org/toh/netgear/dgn2200

Hardwarebeschreibung: Broadcom BCM63xx


Zurück zu OpenWRT