Mehrere Wifi-Verbindungen konfigurieren (Raspbian): Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 1: | Zeile 1: | ||
== /etc/wpa_supplicant/wpa_supplicant.conf == | |||
In der Datei | |||
<pre> | <pre> | ||
sudo vi /etc/wpa_supplicant/wpa_supplicant.conf | sudo vi /etc/wpa_supplicant/wpa_supplicant.conf | ||
</pre> | </pre> | ||
für jede Wifi-Verbindung einen <code>network</code>-Eintrag hinzufügen: | |||
<pre> | <pre> | ||
Version vom 28. April 2023, 14:49 Uhr
/etc/wpa_supplicant/wpa_supplicant.conf
In der Datei
sudo vi /etc/wpa_supplicant/wpa_supplicant.conf
für jede Wifi-Verbindung einen network-Eintrag hinzufügen:
country=AT
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
ap_scan=1
update_config=1
network={
ssid="SSID-ROUTER-1"
psk="password1"
}
network={
ssid="SSID-ROUTER-2"
psk="password2"
}
/etc/dhcpcd.conf
sudo vi /etc/dhcpcd.conf
interface <Network> arping <IP_Router1> arping <IP_Router2>profile <IP_Router1> static ip_address=<IP_Pi1>/24 static routers=<IP_Router1> static domain_name_servers=<Name_Server1>profile <IP_Router2> static ip_address=<IP_Pi2>/24 static routers=<IP_Router2> static domain_name_servers=<Name_Server2>
interface wlan0 arping 10.0.0.1 arping 10.3.0.1 profile 10.0.0.1 static ip_address=10.0.0.180/24 static routers=10.0.0.1 static domain_name_servers=8.8.8.8 8.8.4.4 profile 10.3.0.1 static ip_address=10.3.0.180/24 static routers=10.3.0.1 static domain_name_servers=8.8.8.8 8.8.4.4
Links
https://wiki.ubuntuusers.de/WLAN/wpa_supplicant/#Roaming
Zurück zu Netzwerk Wireless