Seafile (Ubuntu 18.04)

Aus Tutorials
Zur Navigation springen Zur Suche springen

Noch in Bearbeitung


Installation

Download

https://github.com/haiwen/seafile-rpi/releases 

cd ~/temp
wget https://github.com/haiwen/seafile-rpi/releases/download/v7.1.4/seafile-server_7.1.4_pi-bionic-stable.tar.gz

Entpacken

sudo mkdir -p /opt/seafile/installed
sudo mv seafile-server_* /opt/seafile/
cd /opt/seafile/
sudo tar -xzf seafile-server_*
sudo mv seafile-server_* installed

Datenbank anlegen

mysql -u root -p 
create user 'seafile'@'%' identified by '<password>';

create database `ccnet_db` character set = 'utf8';
create database `seafile_db` character set = 'utf8';
create database `seahub_db` character set = 'utf8';

GRANT ALL PRIVILEGES ON `ccnet_db`.* to 'seafile'@'%';
GRANT ALL PRIVILEGES ON `seafile_db`.* to 'seafile'@'%';
GRANT ALL PRIVILEGES ON `seahub_db`.* to 'seafile'@'%';

flush privileges;
quit

Abhängigkeiten installieren

sudo apt-get install -y python3 python3-setuptools python3-pip libmemcached-dev zlib1g-dev
sudo pip3 install --timeout=3600 Pillow pylibmc captcha jinja2 sqlalchemy django-pylibmc django-simple-captcha python3-ldap

Seafile installieren

cd seafile-server-*
sudo ./setup-seafile-mysql.sh

Server stoppen

sudo seafile-server-latest/seahub.sh stop
sudo seafile-server-latest/seafile.sh stop

Konfiguration

/opt/seafile/conf/seafdav.conf

Um Konflikte mit Tomcat zu vermeiden, in der Konfigurationsdatei 

sudo vi /opt/seafile/conf/seafdav.conf

den Wert für port auf 

port = 8085

ändern.

Benutzer anlegen

Einen System-Benutzer seafile ohne Homeverzeichnis und ohne Loginmöglichkeit, anlegen: 

sudo addgroup --system --no-create-home --disabled-login --gid 1005 seafile
sudo adduser --system --no-create-home --disabled-login --uid 1005 --ingroup seafile seafile

/opt/seafile/seafile-data

sudo mkdir -p /mnt/synology/web1/seafile/backup/init/
sudo mkdir -p /mnt/synology/web1/seafile/
sudo rsync -av /opt/seafile/seafile-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seafile-data
sudo mv /opt/seafile/seafile-data /mnt/synology/web1/seafile/backup/init/
cd /opt/seafile/
sudo ln -s /mnt/synology/web1/seafile/seafile-data seafile-data

/opt/seafile/seahub-data

sudo mkdir -p /mnt/synology/web1/seafile/seahub-data
sudo rsync -av /opt/seafile/seahub-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seahub-data
sudo mv /opt/seafile/seahub-data /mnt/synology/web1/seafile/backup/init/
sudo ln -s /mnt/synology/web1/seafile/seahub-data seahub-data

Besitzer ändern

sudo chown -R seafile:seafile /opt/seafile/
sudo chown -R seafile:seafile /mnt/synology/web1/seafile/

Server testen

Damit der Server von aussen erreichbar ist, muss die Datei 

sudo vi conf/gunicorn.conf.py

geöffnet und folgende Zeilen angepasst werden: 

#bind = "127.0.0.1:8000"                                                                                                                                                                                                                     bind = "0.0.0.0:8000"

Danach die Server mit folgenden Kommandos starten: 

sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh start
sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh start

Bei fehlerfreiem Start sollte der Server unter http://10.0.0.176:8000/ erreichbar sein.


Wenn alles geklappt hat, können die Server mit folgenden Kommandos wieder gestoppt werden: 

sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh stop
sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh stop

Links

https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md

Autostart

Seafile

sudo vi /etc/systemd/system/seafile.service

[Unit]
Description=Seafile
After=network.target
After=mariadb.service

[Service]
Type=forking
ExecStart=/opt/seafile/seafile-server-latest/seafile.sh start
ExecStop=/opt/seafile/seafile-server-latest/seafile.sh stop
LimitNOFILE=infinity
User=seafile
Group=seafile

[Install]
WantedBy=multi-user.target

Seahub

sudo vi /etc/systemd/system/seahub.service

[Unit]
Description=Seafile hub
After=network.target seafile.service

[Service]
Type=forking
Environment="LC_ALL=C"
# change start to start-fastcgi if you want to run fastcgi
ExecStart=/opt/seafile/seafile-server-latest/seahub.sh start
ExecStop=/opt/seafile/seafile-server-latest/seahub.sh stop
User=seafile
Group=seafile

[Install]
WantedBy=multi-user.target

Aktivieren

sudo systemctl enable seafile.service
sudo systemctl enable seahub.service

Links

https://download.seafile.com/published/seafile-manual/deploy/start_seafile_at_system_bootup.md

WebDAV

Für WebDAV-Support die Datei 

sudo vi /opt/seafile/conf/seafdav.conf

bearbeiten und folgende Zeilen anpassen: 

enabled = true
port = 8085
share_name = /seafdav

Danach Seafile mittels dem Kommando 

sudo systemctl stop seafile.service
sudo systemctl restart seahub.service
sudo systemctl start seafile.service

neustarten.

Links

https://download.seafile.com/published/seafile-manual/extension/webdav.md

Domain Name

Apache

sudo a2enmod rewrite
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_html

sudo vi /etc/apache2/sites-available/seafile.conf 

<VirtualHost *:80>
  ServerName seafile.kirner.or.at
  Redirect / https://seafile.kirner.or.at
</VirtualHost>

sudo vi /etc/apache2/sites-available/seafile-ssl.conf 

<VirtualHost *:443>
  ServerName seafile.kirner.or.at

  DocumentRoot /var/www

  SSLEngine On
  SSLCertificateFile /etc/ssl/certs/seafile.crt
  SSLCertificateKeyFile /etc/ssl/private/apache.key

  Alias /media /opt/seafile/seafile-server-latest/seahub/media

  <Location /media>
    Require all granted
  </Location>

  RewriteEngine On

  #
  # seafile fileserver
  #
  ProxyPass /seafhttp http://127.0.0.1:8082
  ProxyPassReverse /seafhttp http://127.0.0.1:8082
  RewriteRule ^/seafhttp - [QSA,L]

  #
  # WebDAV
  # We use http proxy, since SeafDAV is incompatible with FCGI proxy in Apache 2.4.
  #
  ProxyPass /seafdav http://127.0.0.1:8085/seafdav
  ProxyPassReverse /seafdav http://127.0.0.1:8085/seafdav

  #
  # seahub
  #
  SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1
  ProxyPreserveHost On
  ProxyPass / http://127.0.0.1:8000/
  ProxyPassReverse / http://127.0.0.1:8000/
</VirtualHost>

ccnet.conf

sudo vi /opt/seafile/conf/ccnet.conf

SERVICE_URL = https://seafile.kirner.or.at

seahub_settings.py

sudo vi /opt/seafile/conf/seahub_settings.py

FILE_SERVER_ROOT = 'https://seafilenew.kirner.or.at/seafhttp'

Links

https://download.seafile.com/published/seafile-manual/deploy/https_with_apache.md

Logrotate

/etc/logrotate.d/seafile

sudo vi /etc/logrotate.d/seafile

/opt/seafile/logs/seafile.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seaf-server.pid ] || kill -USR1 `cat /opt/seafile/pids/seaf-server.pid`
        endscript
}

/opt/seafile/logs/ccnet.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/ccnet.pid ] || kill -USR1 `cat /opt/seafile/pids/ccnet.pid`
        endscript
}

/opt/seafile/logs/seahub.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seahub.pid ] || kill -USR1 `cat /opt/seafile/pids/seahub.pid`
        endscript
}

/opt/seafile/logs/seafdav.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seafdav.pid ] || kill -USR1 `cat /opt/seafile/pids/seafdav.pid`
        endscript
}

/opt/seafile/logs/controller.log
{
	daily
	missingok
	rotate 15
	compress
	delaycompress
	notifempty
	sharedscripts
}

Test

siehe logrotate

Links

https://download.seafile.com/published/seafile-manual/deploy/using_logrotate.md

Mail-Versand

EMAIL_USE_TLS = False
EMAIL_HOST = 'smtp.example.com'        # smpt server
EMAIL_HOST_USER = 'username@example.com'    # username and domain
EMAIL_HOST_PASSWORD = 'password'    # password
EMAIL_PORT = 25
DEFAULT_FROM_EMAIL = EMAIL_HOST_USER
SERVER_EMAIL = EMAIL_HOST_USER

Probleme

ImportError: cannot import name '_imaging' from 'PIL' (/opt/seafile/seafile-server-7.1.4/seahub/thirdpart/PIL/__init__.py)

Mitgelieferte Bibliothek PIL umbenennen (wird durch pillow ersetzt): 

cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv PIL/ PIL.bak

Links

https://forum.seafile.com/t/ubuntu-upgrade-to-20-04-broke-seahub-arm/12072

/opt/seafile/seafile-server-7.1.4/seahub/thirdpart/Crypto/Util/../Cipher/_raw_ecb.so: cannot open shared object file: No such file or directory

Mitgelieferte Bibliothek Crypto umbenennen (wird durch pycrypto ersetzt): 

cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv Crypto/ Crypto.bak

Links

https://www.gitmemory.com/vmario89

Links

https://download.seafile.com/published/seafile-manual/home.md

https://www.raspberry-pi-geek.de/ausgaben/rpg/2019/02/seafile-cloud-auf-dem-raspberry-pi/


Zurück zu Seafile

Abgerufen von „https://tutorials.kirner.or.at/tutorials/index.php?title=Seafile_(Ubuntu_18.04)&oldid=8140“