NETGEAR DGN2200M-100PES (OpenWRT)
Noch in Bearbeitung
Voraussetzungen
Annex A
http://www.a1community.net/t5/Festnetz-Hardware/Annex-A-oder-Annex-B/td-p/19442
Installation über die Serielle Schnittstelle
https://wiki.openwrt.org/doc/hardware/port.serial
Kabel
https://wiki.openwrt.org/doc/hardware/port.serial.cables
Stiftleisten
https://www.conrad.at/de/stiftleisten-buchsenleisten-o0224620.html
tftpd-Server
http://www.netzwelt.de/download/11795-tftpd32.html
http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/
https://www.symantec.com/connect/articles/install-open-tftp-server-deployment-solution-71
Minicom
https://help.ubuntu.com/community/Minicom
Downloads
https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/
Konfiguration
Zusätzliche Pakete können unter https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ runtergeladen werden.
ADSL Modem
Links
https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5
https://wiki.openwrt.org/doc/howto/internet.connection
https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149
https://johannes.truschnigg.info/blog/2015-12-07
Probleme
Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded. Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48 Tue Mar 1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0 Tue Mar 1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: Exit.
Inhalt von /etc/config/interfaces
V1
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd62:91b5:3fc2::/48'
config interface 'lan'
option ifname 'eth1'
option force_link '1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '10.2.0.3'
config adsl_device 'adsl'
option fwannex 'a'
option annex 'a'
config interface 'wan'
option _orig_ifname 'eth0'
option _orig_bridge 'false'
option proto 'pppoa'
option encaps 'vc'
option atmdev '0'
option vci '48'
option vpi '8'
option username '<user name>'
option password '<password>'
option demand '0'
config interface 'wan6'
option ifname 'eth0'
option proto 'dhcpv6'
config switch
option name 'eth1'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'eth1'
option vlan '1'
option ports '0 1 2 3 4 5'
V2
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd62:91b5:3fc2::/48'
config interface 'lan'
option ifname 'eth1'
option force_link '1'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '10.2.0.3'
config atm-bridge 'atm'
option encaps 'vc'
option payload 'bridged'
option vci '48'
option vpi '8'
config dsl 'dsl'
option xfer_mode 'atm'
option line_mode 'adsl'
option annex 'a'
config interface 'wan'
option ifname 'nas0'
option proto 'pppoa'
option ipv6 'auto'
option username '<user name>'
option password '<password>'
config interface 'wan6'
option ifname 'eth0'
option proto 'dhcpv6'
config switch
option name 'eth1'
option reset '1'
option enable_vlan '1'
Links
https://wiki.openwrt.org/toh/hwdata/netgear/netgear_dgn2200_v1
https://wiki.openwrt.org/toh/netgear/dgn2200
Hardwarebeschreibung: Broadcom BCM63xx
Zurück zu OpenWRT