NETGEAR DGN2200M-100PES (OpenWRT)
Noch in Bearbeitung
Voraussetzungen
Annex A
http://www.a1community.net/t5/Festnetz-Hardware/Annex-A-oder-Annex-B/td-p/19442
Installation über die Serielle Schnittstelle
https://wiki.openwrt.org/doc/hardware/port.serial
Kabel
https://wiki.openwrt.org/doc/hardware/port.serial.cables
Stiftleisten
https://www.conrad.at/de/stiftleisten-buchsenleisten-o0224620.html
tftpd-Server
http://www.netzwelt.de/download/11795-tftpd32.html
http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/
https://www.symantec.com/connect/articles/install-open-tftp-server-deployment-solution-71
Minicom
https://help.ubuntu.com/community/Minicom
Downloads
https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/
Konfiguration
Zusätzliche Pakete können unter https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ runtergeladen werden.
ADSL Modem
Folgende Pakete herunterladen und installieren:
- kmod-ppp Download
- linux-atm Download
- kmod-atm Download
- kmod-pppoa Download
- ppp-mod-pppoa Download
- br2684ctl (scheinbar doch nur bei PPPoE) Download
opkg install kmod-ppp_3.18.23-1_brcm63xx.ipk opkg install linux-atm_2.5.2-5_brcm63xx.ipk opkg install kmod-atm_3.18.23-1_brcm63xx.ipk opkg install kmod-pppoa_3.18.23-1_brcm63xx.ipk opkg install ppp-mod-pppoa_2.4.7-6_brcm63xx.ipk opkg install br2684ctl_2.5.2-5_brcm63xx.ipk
Links
https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5
Probleme
Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded. Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48 Tue Mar 1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0 Tue Mar 1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device Tue Mar 1 10:49:06 2016 daemon.info pppd[23654]: Exit.
Inhalt von /etc/config/interfaces
config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd62:91b5:3fc2::/48' config interface 'lan' option ifname 'eth1' option force_link '1' option type 'bridge' option proto 'static' option netmask '255.255.255.0' option ip6assign '60' option ipaddr '10.2.0.3' config interface 'wan' option _orig_ifname 'eth0' option _orig_bridge 'false' option proto 'pppoa' option encaps 'vc' option atmdev '0' option vci '48' option vpi '8' option username '6962210000' option password 'zgyjnujc' option demand '0' config interface 'wan6' option ifname 'eth0' option proto 'dhcpv6' config switch option name 'eth1' option reset '1' option enable_vlan '1' config switch_vlan option device 'eth1' option vlan '1' option ports '0 1 2 3 4 5'
Links
https://wiki.openwrt.org/toh/hwdata/netgear/netgear_dgn2200_v1
https://wiki.openwrt.org/toh/netgear/dgn2200
Hardwarebeschreibung: Broadcom BCM63xx
Zurück zu OpenWRT