Netzwerkbrücke (Raspbian)

Noch in Bearbeitung

Installation

sudo apt-get install bridge-utils
sudo apt-get install dnsmasq

Konfiguration

Datei /etc/wpa_supplicant/wpa_supplicant.conf:

country=AT
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
        ssid="<ssid>"
        psk="<password>"
        proto=RSN
        key_mgmt=WPA-PSK
        pairwise=CCMP
        #group=TKIP
        auth_alg=OPEN
}

Datei /etc/network/interfaces:

source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

#auto eth0
iface eth0 inet dhcp

# WLAN
auto  wlan0
allow-hotplug wlan0
iface wlan0 inet manual
        wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

# Netzwerkbrücke
auto br0
iface br0 inet static
        address 10.0.0.99
        netmask 255.255.255.0
        gateway 10.0.0.1
        dns-nameservers 10.0.0.101
        bridge_ports eth0 wlan0
        bridge_fd 5
        bridge_stp no

Testen der Datei wpa_supplicant.conf:

sudo wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d

Fehler

association request to the driver failed

Links

https://wiki.debian.org/BridgeNetworkConnections#Setting_up_your_Bridge

Zurück zu Raspbian