Netzwerkbrücke (Raspbian): Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Zeile 57: | Zeile 57: | ||
<pre> | <pre> | ||
sudo wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d | sudo wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d | ||
</pre> | |||
== Fehler == | |||
<pre> | |||
association request to the driver failed | |||
</pre> | </pre> | ||
Version vom 27. April 2016, 23:45 Uhr
Noch in Bearbeitung
Installation
sudo apt-get install bridge-utils sudo apt-get install dnsmasq
Konfiguration
Datei /etc/wpa_supplicant/wpa_supplicant.conf:
country=AT ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="<ssid>" psk="<password>" proto=RSN key_mgmt=WPA-PSK pairwise=CCMP #group=TKIP auth_alg=OPEN }
Datei /etc/network/interfaces:
source-directory /etc/network/interfaces.d auto lo iface lo inet loopback #auto eth0 iface eth0 inet dhcp # WLAN auto wlan0 allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf # Netzwerkbrücke auto br0 iface br0 inet static address 10.0.0.99 netmask 255.255.255.0 gateway 10.0.0.1 dns-nameservers 10.0.0.101 bridge_ports eth0 wlan0 bridge_fd 5 bridge_stp no
sudo wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.conf -d
Fehler
association request to the driver failed
Links
Zurück zu Raspbian