NETGEAR DGN2200M-100PES (OpenWRT): Unterschied zwischen den Versionen

Aus Tutorials
Zur Navigation springen Zur Suche springen
Zeile 80: Zeile 80:
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
</pre>
Inhalt von <code>/etc/config/interfaces</code>
<pre>
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'
config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'
config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'
config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '6962210000'
        option password 'zgyjnujc'
        option demand '0'
config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'
config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'
</pre>
</pre>



Version vom 31. Dezember 2017, 16:57 Uhr

Noch in Bearbeitung


Voraussetzungen

Annex A

http://www.a1community.net/t5/Festnetz-Hardware/Annex-A-oder-Annex-B/td-p/19442

Installation über die Serielle Schnittstelle

https://wiki.openwrt.org/doc/hardware/port.serial


Kabel

https://wiki.openwrt.org/doc/hardware/port.serial.cables

Stiftleisten

https://www.conrad.at/de/stiftleisten-buchsenleisten-o0224620.html

tftpd-Server

http://www.netzwelt.de/download/11795-tftpd32.html

http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/

https://www.symantec.com/connect/articles/install-open-tftp-server-deployment-solution-71

Minicom

https://help.ubuntu.com/community/Minicom

Downloads

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin

Konfiguration

Zusätzliche Pakete können unter https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ runtergeladen werden.

ADSL Modem

Folgende Pakete herunterladen und installieren:

  1. kmod-ppp Download
  2. linux-atm Download
  3. kmod-atm Download
  4. kmod-pppoa Download
  5. ppp-mod-pppoa Download
  6. br2684ctl (scheinbar doch nur bei PPPoE) Download
opkg install kmod-ppp_3.18.23-1_brcm63xx.ipk
opkg install linux-atm_2.5.2-5_brcm63xx.ipk
opkg install kmod-atm_3.18.23-1_brcm63xx.ipk 
opkg install kmod-pppoa_3.18.23-1_brcm63xx.ipk
opkg install ppp-mod-pppoa_2.4.7-6_brcm63xx.ipk 
opkg install br2684ctl_2.5.2-5_brcm63xx.ipk

Links

https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5

GW7300SeriesUserManual.pdf

Probleme

Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48
Tue Mar  1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.

Inhalt von /etc/config/interfaces

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'

config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '6962210000'
        option password 'zgyjnujc'
        option demand '0'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'

Links

https://wiki.openwrt.org/toh/hwdata/netgear/netgear_dgn2200_v1

https://wiki.openwrt.org/toh/netgear/dgn2200

Hardwarebeschreibung: Broadcom BCM63xx


Zurück zu OpenWRT