Routerkonfigurationtsdateien (Raspberry): Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(Die Seite wurde neu angelegt: „== 11.05.2016 == ''/etc/network/interfaces'': <pre> source-directory /etc/network/interfaces.d auto lo iface lo inet loopback auto eth0 iface eth0 inet sta…“) |
|||
Zeile 48: | Zeile 48: | ||
up route add -net 10.7.0.0 netmask 255.255.255.0 gw 10.1.0.1 metric 1 | up route add -net 10.7.0.0 netmask 255.255.255.0 gw 10.1.0.1 metric 1 | ||
</pre> | </pre> | ||
Zurück zu [[Router (Raspbian)]] |
Version vom 11. Mai 2016, 19:12 Uhr
11.05.2016
/etc/network/interfaces:
source-directory /etc/network/interfaces.d auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.0.1 netmask 255.255.255.0 auto wlan0 allow-hotplug wlan0 iface wlan0 inet static wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf address 10.0.0.98 netmask 255.255.255.0 gateway 10.0.0.138 dns-nameservers 10.0.0.138 # NAT und Masquerading aktivieren up /sbin/iptables -A FORWARD -o wlan0 -i eth0 -m conntrack --ctstate NEW -j ACCEPT up /sbin/iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT up /sbin/iptables -t nat -F POSTROUTING up /sbin/iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE # IP-Forwarding aktivieren up sysctl -w net.ipv4.ip_forward=1 up sysctl -w net.ipv6.conf.all.forwarding=1 # Port TCP 81 an IP-Adresse 10.1.0.150:80 (Webif) up /sbin/iptables -t nat -A PREROUTING -i wlan0 -p tcp --dport 81 -j DNAT --to-destination 10.1.0.150:80 up /sbin/iptables -A FORWARD -i wlan0 -d 10.1.0.150 -p tcp --dport 81 -j ACCEPT # Port TCP 81 auch ueber OpenVPN an 10.1.0.150 weiterleiten up /sbin/iptables -t nat -A PREROUTING -i tun0 -p tcp --dport 81 -j DNAT --to-destination 10.1.0.150:80 up /sbin/iptables -A FORWARD -i tun0 -d 10.1.0.150 -p tcp --dport 81 -j ACCEPT # Port UDP 1194 an IP-Adresse 10.1.0.150 (OpenVPN) up /sbin/iptables -t nat -A PREROUTING -i wlan0 -p udp --dport 1194 -j DNAT --to-destination 10.1.0.150 up /sbin/iptables -A FORWARD -i wlan0 -d 10.1.0.150 -p udp --dport 1194 -j ACCEPT # Route für OpenVPN-Pakete aus Ethernet-Schnittstelle up route add -net 10.7.0.0 netmask 255.255.255.0 gw 10.1.0.1 metric 1
Zurück zu Router (Raspbian)