ADSL Modem (Netgear DGN2200M): Unterschied zwischen den Versionen

Aus Tutorials
Zur Navigation springen Zur Suche springen
(Die Seite wurde neu angelegt: „{{note|Noch in Bearbeitung}} Siehe auch ASDL Verbindung. ==== Versuch 1 ==== Folgende Pakete herunterladen und installieren:…“)
 
Zeile 51: Zeile 51:
<pre>
<pre>
opkg install *.ipk
opkg install *.ipk
</pre>
==== Links ====
[https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5 https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5]
[https://wiki.openwrt.org/doc/howto/internet.connection https://wiki.openwrt.org/doc/howto/internet.connection]
[https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1 https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1]
[https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149 https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149]
[https://johannes.truschnigg.info/blog/2015-12-07 https://johannes.truschnigg.info/blog/2015-12-07]
[[Medium:GW7300SeriesUserManual.pdf|GW7300SeriesUserManual.pdf]]
==== Probleme ====
<pre>
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48
Tue Mar  1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
</pre>
===== Inhalt von <code>/etc/config/interfaces</code> =====
====== V1 ======
<pre>
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'
config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'
config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'
config adsl_device 'adsl'
        option fwannex 'a'
        option annex 'a'
config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '<user name>'
        option password '<password>'
        option demand '0'
config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'
config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'
</pre>
====== V2 ======
<pre>
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'
config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'
config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'
config atm-bridge 'atm'
        option encaps 'vc'
        option payload 'bridged'
        option vci '48'
        option vpi '8'
config dsl 'dsl'
        option xfer_mode 'atm'
        option line_mode 'adsl'
        option annex 'a'
config interface 'wan'
        option ifname 'nas0'
        option proto 'pppoa'
        option ipv6 'auto'
        option username '<user name>'
        option password '<password>'
config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'
config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
</pre>
</pre>

Version vom 6. Januar 2018, 19:18 Uhr

Noch in Bearbeitung


Siehe auch ASDL Verbindung.

Versuch 1

Folgende Pakete herunterladen und installieren:

  1. kmod-ppp Download
  2. linux-atm Download
  3. kmod-atm Download
  4. kmod-pppoa Download
  5. ppp-mod-pppoa Download
  6. br2684ctl (scheinbar doch nur bei PPPoE) Download
opkg install kmod-ppp_3.18.23-1_brcm63xx.ipk
opkg install linux-atm_2.5.2-5_brcm63xx.ipk
opkg install kmod-atm_3.18.23-1_brcm63xx.ipk 
opkg install kmod-pppoa_3.18.23-1_brcm63xx.ipk
opkg install ppp-mod-pppoa_2.4.7-6_brcm63xx.ipk 
opkg install br2684ctl_2.5.2-5_brcm63xx.ipk

Versuch 2

  1. kmod-ppp Download
  2. kmod-gre Download
  3. kmod-lib-crc-ccitt Download
  4. kmod-mppe Download
  5. kmod-pppox Download
  6. kmod-pptp Download
  7. kmod-slhc Download
  8. luci-proto-ppp
  9. ppp Download
  10. ppp-mod-pptp Download
  11. resolveip Download
  12. kmod-iptunnel Download
  13. kmod-crypto-sha1 Download
  14. kmod-crypto-ecb Download
  15. kmod-crypto-manager Download
  16. kmod-crypto-hash Download
  17. kmod-crypto-aead Download
  18. kmod-crypto-pcompress Download
pscp -scp * root@<router ip>:/tmp

opkg install *.ipk

Links

https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5

https://wiki.openwrt.org/doc/howto/internet.connection

https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1

https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149

https://johannes.truschnigg.info/blog/2015-12-07

GW7300SeriesUserManual.pdf

Probleme

Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48
Tue Mar  1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
Inhalt von /etc/config/interfaces
V1
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'

config adsl_device 'adsl'
        option fwannex 'a'
        option annex 'a'

config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '<user name>'
        option password '<password>'
        option demand '0'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'
V2
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'

config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'

config atm-bridge 'atm'
        option encaps 'vc'
        option payload 'bridged'
        option vci '48'
        option vpi '8'

config dsl 'dsl'
        option xfer_mode 'atm'
        option line_mode 'adsl'
        option annex 'a'

config interface 'wan'
        option ifname 'nas0'
        option proto 'pppoa'
        option ipv6 'auto'
        option username '<user name>'
        option password '<password>'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
Abgerufen von „https://tutorials.kirner.or.at/tutorials/index.php?title=ADSL_Modem_(Netgear_DGN2200M)&oldid=4000“