NETGEAR DGN2200M-100PES (OpenWRT): Unterschied zwischen den Versionen

Aus Tutorials
Zur Navigation springen Zur Suche springen
 
(23 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
{{note|Noch in Bearbeitung}}
{{note|Noch in Bearbeitung}}


== Allgemein ==
Zusätzliche Pakete können unter [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/] runtergeladen werden.


== Voraussetzungen ==
== Voraussetzungen ==
Zeile 13: Zeile 17:


[https://wiki.openwrt.org/doc/hardware/port.serial https://wiki.openwrt.org/doc/hardware/port.serial]
[https://wiki.openwrt.org/doc/hardware/port.serial https://wiki.openwrt.org/doc/hardware/port.serial]


=== Kabel ===
=== Kabel ===
Zeile 36: Zeile 39:


== Downloads ==
== Downloads ==
=== 15.05.1 ===


[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/ https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/]
[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/ https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/]
Zeile 41: Zeile 46:
[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin]
[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin]


== Konfiguration ==
=== 19.07.4 ===
 
Zusätzliche Pakete können unter [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/] runtergeladen werden.


=== ADSL Modem ===
[https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/ https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/]


Siehe auch [[ASDL Verbindung (OpenWRT)|ASDL Verbindung]].
[https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/generic/openwrt-19.07.4-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/generic/openwrt-19.07.4-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin]


==== Versuch 1 =====
== Originalsoftware ==


Folgende Pakete herunterladen und installieren:
[https://www.netgear.com/support/product/DGN2200v1.aspx https://www.netgear.com/support/product/DGN2200v1.aspx]


# kmod-ppp [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/kmod-ppp_3.18.23-1_brcm63xx.ipk Download]
== Konfiguration ==
# linux-atm [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/linux-atm_2.5.2-5_brcm63xx.ipk Download]
# kmod-atm [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/kmod-atm_3.18.23-1_brcm63xx.ipk Download]
# kmod-pppoa [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/kmod-pppoa_3.18.23-1_brcm63xx.ipk Download]
# ppp-mod-pppoa [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ppp-mod-pppoa_2.4.7-6_brcm63xx.ipk Download]
# br2684ctl (scheinbar doch nur bei PPPoE) [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/br2684ctl_2.5.2-5_brcm63xx.ipk Download]
 
<pre>
opkg install kmod-ppp_3.18.23-1_brcm63xx.ipk
opkg install linux-atm_2.5.2-5_brcm63xx.ipk
opkg install kmod-atm_3.18.23-1_brcm63xx.ipk
opkg install kmod-pppoa_3.18.23-1_brcm63xx.ipk
opkg install ppp-mod-pppoa_2.4.7-6_brcm63xx.ipk
opkg install br2684ctl_2.5.2-5_brcm63xx.ipk
</pre>
 
==== Versuch 2 =====
 
# kmod-ppp [https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/kmod-ppp_3.18.23-1_brcm63xx.ipk Download]
# kmod-gre
# kmod-lib-crc-ccitt
# kmod-mppe
# kmod-ppp
# kmod-pppox
# kmod-pptp
# kmod-slhc
# luci-proto-ppp
# ppp
# ppp-mod-pptp
# resolveip
 
==== Links ====
 
[https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5 https://wiki.openwrt.org/doc/uci/network#protocol_pppoa_ppp_over_atm_aal5]
 
[https://wiki.openwrt.org/doc/howto/internet.connection https://wiki.openwrt.org/doc/howto/internet.connection]
 
[https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1 https://www.dieschmids.at/forum/10-alternative-router-mit-aon-tv/51868-w8970-mit-openwrt-als-vdsl-modem-an-a1]
 
[https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149 https://forum.lede-project.org/t/solved-lede-install-td-w8970-for-vdsl2/4149]
 
[https://johannes.truschnigg.info/blog/2015-12-07 https://johannes.truschnigg.info/blog/2015-12-07]
 
[[Medium:GW7300SeriesUserManual.pdf|GW7300SeriesUserManual.pdf]]
 
==== Probleme ====


<pre>
[[ADSL Modem (Netgear DGN2200M)|ADSL Modem]]
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Plugin pppoatm.so loaded.
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM plugin_init
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: PPPoATM setdevname_pppoatm - SUCCESS:0.8.48
Tue Mar  1 10:49:06 2016 daemon.notice pppd[23654]: pppd 2.4.7 started by root, uid 0
Tue Mar  1 10:49:06 2016 daemon.err pppd[23654]: connect(0.8.48): No such device
Tue Mar  1 10:49:06 2016 daemon.info pppd[23654]: Exit.
</pre>
 
===== Inhalt von <code>/etc/config/interfaces</code> =====
 
====== V1 ======
 
<pre>
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'
 
config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'
 
config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'
 
config adsl_device 'adsl'
        option fwannex 'a'
        option annex 'a'
 
config interface 'wan'
        option _orig_ifname 'eth0'
        option _orig_bridge 'false'
        option proto 'pppoa'
        option encaps 'vc'
        option atmdev '0'
        option vci '48'
        option vpi '8'
        option username '<user name>'
        option password '<password>'
        option demand '0'
 
config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'
 
config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
 
config switch_vlan
        option device 'eth1'
        option vlan '1'
        option ports '0 1 2 3 4 5'
</pre>
 
====== V2 ======
 
<pre>
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'
 
config globals 'globals'
        option ula_prefix 'fd62:91b5:3fc2::/48'
 
config interface 'lan'
        option ifname 'eth1'
        option force_link '1'
        option type 'bridge'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option ipaddr '10.2.0.3'
 
config atm-bridge 'atm'
        option encaps 'vc'
        option payload 'bridged'
        option vci '48'
        option vpi '8'
 
config dsl 'dsl'
        option xfer_mode 'atm'
        option line_mode 'adsl'
        option annex 'a'
 
config interface 'wan'
        option ifname 'nas0'
        option proto 'pppoa'
        option ipv6 'auto'
        option username '<user name>'
        option password '<password>'
 
config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'
 
config switch
        option name 'eth1'
        option reset '1'
        option enable_vlan '1'
</pre>


== Links ==
== Links ==

Aktuelle Version vom 12. September 2020, 17:36 Uhr

Noch in Bearbeitung


Allgemein

Zusätzliche Pakete können unter https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/packages/base/ runtergeladen werden.

Voraussetzungen

Annex A

http://www.a1community.net/t5/Festnetz-Hardware/Annex-A-oder-Annex-B/td-p/19442

Installation über die Serielle Schnittstelle

https://wiki.openwrt.org/doc/hardware/port.serial

Kabel

https://wiki.openwrt.org/doc/hardware/port.serial.cables

Stiftleisten

https://www.conrad.at/de/stiftleisten-buchsenleisten-o0224620.html

tftpd-Server

http://www.netzwelt.de/download/11795-tftpd32.html

http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/

https://www.symantec.com/connect/articles/install-open-tftp-server-deployment-solution-71

Minicom

https://help.ubuntu.com/community/Minicom

Downloads

15.05.1

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/

https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/generic/openwrt-15.05.1-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin

19.07.4

https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/

https://downloads.openwrt.org/releases/19.07.4/targets/brcm63xx/generic/openwrt-19.07.4-brcm63xx-generic-96358VW-generic-squashfs-cfe.bin

Originalsoftware

https://www.netgear.com/support/product/DGN2200v1.aspx

Konfiguration

ADSL Modem

Links

https://wiki.openwrt.org/toh/hwdata/netgear/netgear_dgn2200_v1

https://wiki.openwrt.org/toh/netgear/dgn2200

Hardwarebeschreibung: Broadcom BCM63xx


Zurück zu OpenWRT

Abgerufen von „https://tutorials.kirner.or.at/tutorials/index.php?title=NETGEAR_DGN2200M-100PES_(OpenWRT)&oldid=8729“