Seafile (Ubuntu 18.04): Unterschied zwischen den Versionen

Aus Tutorials
Zur Navigation springen Zur Suche springen
 
(87 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
{{note|Noch in Bearbeitung}}
== Installation ==
== Installation ==


Zeile 41: Zeile 38:
</pre>
</pre>


=== Abhängigkeiten ===
=== Abhängigkeiten installieren ===
 
<pre>
sudo apt-get install -y python3 python3-setuptools python3-pip libmemcached-dev zlib1g-dev
sudo pip3 install --timeout=3600 Pillow pylibmc captcha jinja2 sqlalchemy django-pylibmc django-simple-captcha python3-ldap lxml
</pre>
 
=== Seafile installieren ===
 
<pre>
cd seafile-server-*
sudo ./setup-seafile-mysql.sh
</pre>
 
=== Server stoppen ===
 
<pre>
sudo seafile-server-latest/seahub.sh stop
sudo seafile-server-latest/seafile.sh stop
</pre>
 
== Konfiguration ==
 
=== /opt/seafile/conf/seafdav.conf ===
 
Um Konflikte mit Tomcat zu vermeiden, in der Konfigurationsdatei
 
<pre>
sudo vi /opt/seafile/conf/seafdav.conf
</pre>
 
den Wert für ''port'' auf
 
<pre>
port = 8085
</pre>
 
ändern.
 
=== Benutzer anlegen ===
 
Einen System-Benutzer ''seafile'' ohne Homeverzeichnis und ohne Loginmöglichkeit, anlegen:
 
<pre>
sudo addgroup --system --no-create-home --disabled-login --gid 1005 seafile
sudo adduser --system --no-create-home --disabled-login --uid 1005 --ingroup seafile seafile
</pre>
 
=== /opt/seafile/seafile-data ===
 
<pre>
sudo mkdir -p /mnt/synology/web1/seafile/backup/init/
sudo mkdir -p /mnt/synology/web1/seafile/
sudo rsync -av /opt/seafile/seafile-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seafile-data
sudo mv /opt/seafile/seafile-data /mnt/synology/web1/seafile/backup/init/
cd /opt/seafile/
sudo ln -s /mnt/synology/web1/seafile/seafile-data seafile-data
</pre>
 
=== /opt/seafile/seahub-data ===
 
<pre>
sudo mkdir -p /mnt/synology/web1/seafile/seahub-data
sudo rsync -av /opt/seafile/seahub-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seahub-data
sudo mv /opt/seafile/seahub-data /mnt/synology/web1/seafile/backup/init/
sudo ln -s /mnt/synology/web1/seafile/seahub-data seahub-data
</pre>
 
=== Besitzer ändern ===
 
<pre>
sudo chown -R seafile:seafile /opt/seafile/
sudo chown -R seafile:seafile /mnt/synology/web1/seafile/
</pre>
 
=== Server testen ===
 
Damit der Server von aussen erreichbar ist, muss die Datei
 
<pre>
sudo vi conf/gunicorn.conf.py
</pre>
 
geöffnet und folgende Zeilen angepasst werden:
 
<pre>
#bind = "127.0.0.1:8000"                                                                                                                                                                                                                    bind = "0.0.0.0:8000"
</pre>
 
Danach die Server mit folgenden Kommandos starten:
 
<pre>
sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh start
sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh start
</pre>
 
Bei fehlerfreiem Start sollte der Server unter [http://10.0.0.176:8000/ http://10.0.0.176:8000/] erreichbar sein.
 
 
Wenn alles geklappt hat, können die Server mit folgenden Kommandos wieder gestoppt werden:


<pre>
<pre>
sudo apt-get install python3 python3-setuptools python3-pip -y
sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh stop
sudo pip3 install --timeout=3600 Pillow pylibmc captcha jinja2 sqlalchemy django-pylibmc django-simple-captcha python3-ldap
sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh stop
</pre>
</pre>


Zeile 51: Zeile 149:


[https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md]
[https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md]
== Autostart ==
=== Seafile ===
<pre>
sudo vi /etc/systemd/system/seafile.service
</pre>
<pre>
[Unit]
Description=Seafile
After=network.target
After=mariadb.service
[Service]
Type=forking
ExecStart=/opt/seafile/seafile-server-latest/seafile.sh start
ExecStop=/opt/seafile/seafile-server-latest/seafile.sh stop
LimitNOFILE=infinity
User=seafile
Group=seafile
[Install]
WantedBy=multi-user.target
</pre>
=== Seahub ===
<pre>
sudo vi /etc/systemd/system/seahub.service
</pre>
<pre>
[Unit]
Description=Seafile hub
After=network.target seafile.service
[Service]
Type=forking
Environment="LC_ALL=C"
# change start to start-fastcgi if you want to run fastcgi
ExecStart=/opt/seafile/seafile-server-latest/seahub.sh start
ExecStop=/opt/seafile/seafile-server-latest/seahub.sh stop
User=seafile
Group=seafile
[Install]
WantedBy=multi-user.target
</pre>
=== Aktivieren ===
<pre>
sudo systemctl enable seafile.service
sudo systemctl enable seahub.service
</pre>
=== Links ===
[https://download.seafile.com/published/seafile-manual/deploy/start_seafile_at_system_bootup.md https://download.seafile.com/published/seafile-manual/deploy/start_seafile_at_system_bootup.md]
== WebDAV ==
Für WebDAV-Support die Datei
<pre>
sudo vi /opt/seafile/conf/seafdav.conf
</pre>
bearbeiten und folgende Zeilen anpassen:
<pre>
enabled = true
port = 8085
share_name = /seafdav
</pre>
Danach ''Seafile'' mittels dem Kommando
<pre>
sudo systemctl stop seahub.service
sudo systemctl restart seafile.service
sudo systemctl start seahub.service
</pre>
neustarten.
=== Links ===
[https://download.seafile.com/published/seafile-manual/extension/webdav.md https://download.seafile.com/published/seafile-manual/extension/webdav.md]
== Domain Name ==
=== Apache ===
<pre>
sudo a2enmod rewrite
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_html
</pre>
<pre>
sudo vi /etc/apache2/sites-available/seafile.conf
</pre>
<pre>
<VirtualHost *:80>
  ServerName seafile.kirner.or.at
  Redirect / https://seafile.kirner.or.at
</VirtualHost>
</pre>
<pre>
sudo vi /etc/apache2/sites-available/seafile-ssl.conf
</pre>
<pre>
<VirtualHost *:443>
  ServerName seafile.kirner.or.at
  DocumentRoot /var/www
  SSLEngine On
  SSLCertificateFile /etc/ssl/certs/seafile.crt
  SSLCertificateKeyFile /etc/ssl/private/apache.key
  Alias /media /opt/seafile/seafile-server-latest/seahub/media
  <Location /media>
    Require all granted
  </Location>
  RewriteEngine On
  #
  # seafile fileserver
  #
  ProxyPass /seafhttp http://127.0.0.1:8082
  ProxyPassReverse /seafhttp http://127.0.0.1:8082
  RewriteRule ^/seafhttp - [QSA,L]
  #
  # WebDAV
  # We use http proxy, since SeafDAV is incompatible with FCGI proxy in Apache 2.4.
  #
  ProxyPass /seafdav http://127.0.0.1:8085/seafdav
  ProxyPassReverse /seafdav http://127.0.0.1:8085/seafdav
  #
  # seahub
  #
  SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1
  ProxyPreserveHost On
  ProxyPass / http://127.0.0.1:8000/
  ProxyPassReverse / http://127.0.0.1:8000/
</VirtualHost>
</pre>
=== ccnet.conf ===
<pre>
sudo vi /opt/seafile/conf/ccnet.conf
</pre>
<pre>
SERVICE_URL = https://seafile.kirner.or.at
</pre>
=== seahub_settings.py ===
<pre>
sudo vi /opt/seafile/conf/seahub_settings.py
</pre>
<pre>
FILE_SERVER_ROOT = 'https://seafile.kirner.or.at/seafhttp'
</pre>
=== Links ===
https://download.seafile.com/published/seafile-manual/deploy/https_with_apache.md
== Logrotate ==
=== /etc/logrotate.d/seafile ===
<pre>
sudo vi /etc/logrotate.d/seafile
</pre>
<pre>
/opt/seafile/logs/seafile.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seaf-server.pid ] || kill -USR1 `cat /opt/seafile/pids/seaf-server.pid`
        endscript
}
/opt/seafile/logs/ccnet.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/ccnet.pid ] || kill -USR1 `cat /opt/seafile/pids/ccnet.pid`
        endscript
}
/opt/seafile/logs/seahub.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seahub.pid ] || kill -USR1 `cat /opt/seafile/pids/seahub.pid`
        endscript
}
/opt/seafile/logs/seafdav.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seafdav.pid ] || kill -USR1 `cat /opt/seafile/pids/seafdav.pid`
        endscript
}
/opt/seafile/logs/controller.log
{
daily
missingok
rotate 15
compress
delaycompress
notifempty
sharedscripts
}
</pre>
=== Test ===
siehe [[logrotate (Linux)#Testing|logrotate]]
=== Links ===
[https://download.seafile.com/published/seafile-manual/deploy/using_logrotate.md https://download.seafile.com/published/seafile-manual/deploy/using_logrotate.md]
== Mail-Versand ==
=== seahub_settings.py ===
<pre>
sudo vi /opt/seafile/conf/seahub_settings.py
</pre>
<pre>
EMAIL_USE_TLS = True
EMAIL_HOST = 'mail.<domain>'          # smpt server
EMAIL_HOST_USER = '<user>@<domain>'    # username and domain
EMAIL_HOST_PASSWORD = '<password>'    # password
EMAIL_PORT = 587
DEFAULT_FROM_EMAIL = EMAIL_HOST_USER
SERVER_EMAIL = EMAIL_HOST_USER
</pre>
=== Links ===
[https://download.seafile.com/published/seafile-manual/config/sending_email.md https://download.seafile.com/published/seafile-manual/config/sending_email.md]
== Cache ==
=== Installation ===
<pre>
sudo apt-get install -y memcached libmemcached-dev
sudo systemctl enable --now memcached
</pre>
=== Konfiguration ===
Die Datei
<pre>
sudo vi /opt/seafile/conf/seahub_settings.py
</pre>
bearbeiten und am Ende folgende Zeilen hinzufügen:
<pre>
CACHES = {
    'default': {
        'BACKEND': 'django_pylibmc.memcached.PyLibMCCache',
        'LOCATION': '127.0.0.1:11211',
    },
}
</pre>
=== Links ===
[https://download.seafile.com/published/seafile-manual/deploy/add_memcached.md https://download.seafile.com/published/seafile-manual/deploy/add_memcached.md]
== Zwei-Faktor-Authentifizierung ==
=== Links ===
[https://manual.seafile.com/deploy_pro/two_factor_authentication/ https://manual.seafile.com/deploy_pro/two_factor_authentication/]
== fail2ban ==
=== Links ===
[https://manual.seafile.com/security/fail2ban/ https://manual.seafile.com/security/fail2ban/]
== Probleme ==
=== ImportError: cannot import name '_imaging' from 'PIL' (/opt/seafile/seafile-server-7.1.4/seahub/thirdpart/PIL/__init__.py) ===
Mitgelieferte Bibliothek ''PIL'' umbenennen (wird durch ''pillow'' ersetzt):
<pre>
cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv PIL/ PIL.bak
</pre>
==== Links ====
[https://forum.seafile.com/t/ubuntu-upgrade-to-20-04-broke-seahub-arm/12072 https://forum.seafile.com/t/ubuntu-upgrade-to-20-04-broke-seahub-arm/12072]
=== /opt/seafile/seafile-server-7.1.4/seahub/thirdpart/Crypto/Util/../Cipher/_raw_ecb.so: cannot open shared object file: No such file or directory ===
Mitgelieferte Bibliothek ''Crypto'' umbenennen (wird durch ''pycrypto'' ersetzt):
<pre>
cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv Crypto/ Crypto.bak
</pre>
==== Links ====
[https://www.gitmemory.com/vmario89 https://www.gitmemory.com/vmario89]


== Links ==
== Links ==

Aktuelle Version vom 15. Mai 2021, 15:24 Uhr

Installation

Download

https://github.com/haiwen/seafile-rpi/releases 

cd ~/temp
wget https://github.com/haiwen/seafile-rpi/releases/download/v7.1.4/seafile-server_7.1.4_pi-bionic-stable.tar.gz

Entpacken

sudo mkdir -p /opt/seafile/installed
sudo mv seafile-server_* /opt/seafile/
cd /opt/seafile/
sudo tar -xzf seafile-server_*
sudo mv seafile-server_* installed

Datenbank anlegen

mysql -u root -p 
create user 'seafile'@'%' identified by '<password>';

create database `ccnet_db` character set = 'utf8';
create database `seafile_db` character set = 'utf8';
create database `seahub_db` character set = 'utf8';

GRANT ALL PRIVILEGES ON `ccnet_db`.* to 'seafile'@'%';
GRANT ALL PRIVILEGES ON `seafile_db`.* to 'seafile'@'%';
GRANT ALL PRIVILEGES ON `seahub_db`.* to 'seafile'@'%';

flush privileges;
quit

Abhängigkeiten installieren

sudo apt-get install -y python3 python3-setuptools python3-pip libmemcached-dev zlib1g-dev
sudo pip3 install --timeout=3600 Pillow pylibmc captcha jinja2 sqlalchemy django-pylibmc django-simple-captcha python3-ldap lxml

Seafile installieren

cd seafile-server-*
sudo ./setup-seafile-mysql.sh

Server stoppen

sudo seafile-server-latest/seahub.sh stop
sudo seafile-server-latest/seafile.sh stop

Konfiguration

/opt/seafile/conf/seafdav.conf

Um Konflikte mit Tomcat zu vermeiden, in der Konfigurationsdatei 

sudo vi /opt/seafile/conf/seafdav.conf

den Wert für port auf 

port = 8085

ändern.

Benutzer anlegen

Einen System-Benutzer seafile ohne Homeverzeichnis und ohne Loginmöglichkeit, anlegen: 

sudo addgroup --system --no-create-home --disabled-login --gid 1005 seafile
sudo adduser --system --no-create-home --disabled-login --uid 1005 --ingroup seafile seafile

/opt/seafile/seafile-data

sudo mkdir -p /mnt/synology/web1/seafile/backup/init/
sudo mkdir -p /mnt/synology/web1/seafile/
sudo rsync -av /opt/seafile/seafile-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seafile-data
sudo mv /opt/seafile/seafile-data /mnt/synology/web1/seafile/backup/init/
cd /opt/seafile/
sudo ln -s /mnt/synology/web1/seafile/seafile-data seafile-data

/opt/seafile/seahub-data

sudo mkdir -p /mnt/synology/web1/seafile/seahub-data
sudo rsync -av /opt/seafile/seahub-data /mnt/synology/web1/seafile/
sudo chmod 700 /mnt/synology/web1/seafile/seahub-data
sudo mv /opt/seafile/seahub-data /mnt/synology/web1/seafile/backup/init/
sudo ln -s /mnt/synology/web1/seafile/seahub-data seahub-data

Besitzer ändern

sudo chown -R seafile:seafile /opt/seafile/
sudo chown -R seafile:seafile /mnt/synology/web1/seafile/

Server testen

Damit der Server von aussen erreichbar ist, muss die Datei 

sudo vi conf/gunicorn.conf.py

geöffnet und folgende Zeilen angepasst werden: 

#bind = "127.0.0.1:8000"                                                                                                                                                                                                                     bind = "0.0.0.0:8000"

Danach die Server mit folgenden Kommandos starten: 

sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh start
sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh start

Bei fehlerfreiem Start sollte der Server unter http://10.0.0.176:8000/ erreichbar sein.


Wenn alles geklappt hat, können die Server mit folgenden Kommandos wieder gestoppt werden: 

sudo -u seafile /opt/seafile/seafile-server-latest/seahub.sh stop
sudo -u seafile /opt/seafile/seafile-server-latest/seafile.sh stop

Links

https://download.seafile.com/published/seafile-manual/deploy/using_mysql.md

Autostart

Seafile

sudo vi /etc/systemd/system/seafile.service

[Unit]
Description=Seafile
After=network.target
After=mariadb.service

[Service]
Type=forking
ExecStart=/opt/seafile/seafile-server-latest/seafile.sh start
ExecStop=/opt/seafile/seafile-server-latest/seafile.sh stop
LimitNOFILE=infinity
User=seafile
Group=seafile

[Install]
WantedBy=multi-user.target

Seahub

sudo vi /etc/systemd/system/seahub.service

[Unit]
Description=Seafile hub
After=network.target seafile.service

[Service]
Type=forking
Environment="LC_ALL=C"
# change start to start-fastcgi if you want to run fastcgi
ExecStart=/opt/seafile/seafile-server-latest/seahub.sh start
ExecStop=/opt/seafile/seafile-server-latest/seahub.sh stop
User=seafile
Group=seafile

[Install]
WantedBy=multi-user.target

Aktivieren

sudo systemctl enable seafile.service
sudo systemctl enable seahub.service

Links

https://download.seafile.com/published/seafile-manual/deploy/start_seafile_at_system_bootup.md

WebDAV

Für WebDAV-Support die Datei 

sudo vi /opt/seafile/conf/seafdav.conf

bearbeiten und folgende Zeilen anpassen: 

enabled = true
port = 8085
share_name = /seafdav

Danach Seafile mittels dem Kommando 

sudo systemctl stop seahub.service
sudo systemctl restart seafile.service
sudo systemctl start seahub.service

neustarten.

Links

https://download.seafile.com/published/seafile-manual/extension/webdav.md

Domain Name

Apache

sudo a2enmod rewrite
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_html

sudo vi /etc/apache2/sites-available/seafile.conf 

<VirtualHost *:80>
  ServerName seafile.kirner.or.at
  Redirect / https://seafile.kirner.or.at
</VirtualHost>

sudo vi /etc/apache2/sites-available/seafile-ssl.conf 

<VirtualHost *:443>
  ServerName seafile.kirner.or.at

  DocumentRoot /var/www

  SSLEngine On
  SSLCertificateFile /etc/ssl/certs/seafile.crt
  SSLCertificateKeyFile /etc/ssl/private/apache.key

  Alias /media /opt/seafile/seafile-server-latest/seahub/media

  <Location /media>
    Require all granted
  </Location>

  RewriteEngine On

  #
  # seafile fileserver
  #
  ProxyPass /seafhttp http://127.0.0.1:8082
  ProxyPassReverse /seafhttp http://127.0.0.1:8082
  RewriteRule ^/seafhttp - [QSA,L]

  #
  # WebDAV
  # We use http proxy, since SeafDAV is incompatible with FCGI proxy in Apache 2.4.
  #
  ProxyPass /seafdav http://127.0.0.1:8085/seafdav
  ProxyPassReverse /seafdav http://127.0.0.1:8085/seafdav

  #
  # seahub
  #
  SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1
  ProxyPreserveHost On
  ProxyPass / http://127.0.0.1:8000/
  ProxyPassReverse / http://127.0.0.1:8000/
</VirtualHost>

ccnet.conf

sudo vi /opt/seafile/conf/ccnet.conf

SERVICE_URL = https://seafile.kirner.or.at

seahub_settings.py

sudo vi /opt/seafile/conf/seahub_settings.py

FILE_SERVER_ROOT = 'https://seafile.kirner.or.at/seafhttp'

Links

https://download.seafile.com/published/seafile-manual/deploy/https_with_apache.md

Logrotate

/etc/logrotate.d/seafile

sudo vi /etc/logrotate.d/seafile

/opt/seafile/logs/seafile.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seaf-server.pid ] || kill -USR1 `cat /opt/seafile/pids/seaf-server.pid`
        endscript
}

/opt/seafile/logs/ccnet.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/ccnet.pid ] || kill -USR1 `cat /opt/seafile/pids/ccnet.pid`
        endscript
}

/opt/seafile/logs/seahub.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seahub.pid ] || kill -USR1 `cat /opt/seafile/pids/seahub.pid`
        endscript
}

/opt/seafile/logs/seafdav.log
{
        daily
        missingok
        rotate 15
        compress
        delaycompress
        notifempty
        sharedscripts
        postrotate
                [ ! -f /opt/seafile/pids/seafdav.pid ] || kill -USR1 `cat /opt/seafile/pids/seafdav.pid`
        endscript
}

/opt/seafile/logs/controller.log
{
	daily
	missingok
	rotate 15
	compress
	delaycompress
	notifempty
	sharedscripts
}

Test

siehe logrotate

Links

https://download.seafile.com/published/seafile-manual/deploy/using_logrotate.md

Mail-Versand

seahub_settings.py

sudo vi /opt/seafile/conf/seahub_settings.py

EMAIL_USE_TLS = True
EMAIL_HOST = 'mail.<domain>'           # smpt server
EMAIL_HOST_USER = '<user>@<domain>'    # username and domain
EMAIL_HOST_PASSWORD = '<password>'     # password
EMAIL_PORT = 587
DEFAULT_FROM_EMAIL = EMAIL_HOST_USER
SERVER_EMAIL = EMAIL_HOST_USER

Links

https://download.seafile.com/published/seafile-manual/config/sending_email.md

Cache

Installation

sudo apt-get install -y memcached libmemcached-dev
sudo systemctl enable --now memcached

Konfiguration

Die Datei 

sudo vi /opt/seafile/conf/seahub_settings.py

bearbeiten und am Ende folgende Zeilen hinzufügen: 

CACHES = {
    'default': {
        'BACKEND': 'django_pylibmc.memcached.PyLibMCCache',
        'LOCATION': '127.0.0.1:11211',
    },
}

Links

https://download.seafile.com/published/seafile-manual/deploy/add_memcached.md

Zwei-Faktor-Authentifizierung

Links

https://manual.seafile.com/deploy_pro/two_factor_authentication/

fail2ban

Links

https://manual.seafile.com/security/fail2ban/

Probleme

ImportError: cannot import name '_imaging' from 'PIL' (/opt/seafile/seafile-server-7.1.4/seahub/thirdpart/PIL/__init__.py)

Mitgelieferte Bibliothek PIL umbenennen (wird durch pillow ersetzt): 

cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv PIL/ PIL.bak

Links

https://forum.seafile.com/t/ubuntu-upgrade-to-20-04-broke-seahub-arm/12072

/opt/seafile/seafile-server-7.1.4/seahub/thirdpart/Crypto/Util/../Cipher/_raw_ecb.so: cannot open shared object file: No such file or directory

Mitgelieferte Bibliothek Crypto umbenennen (wird durch pycrypto ersetzt): 

cd /opt/seafile/seafile-server-latest/seahub/thirdpart/
sudo -u seafile mv Crypto/ Crypto.bak

Links

https://www.gitmemory.com/vmario89

Links

https://download.seafile.com/published/seafile-manual/home.md

https://www.raspberry-pi-geek.de/ausgaben/rpg/2019/02/seafile-cloud-auf-dem-raspberry-pi/


Zurück zu Seafile

Abgerufen von „https://tutorials.kirner.or.at/tutorials/index.php?title=Seafile_(Ubuntu_18.04)&oldid=9553“