TP-Link TL-WR841N (OpenWRT): Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(→Links) |
|||
| (5 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
{{note|Noch in Bearbeitung}} | |||
== Download == | |||
=== Installation === | |||
[http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tl-wr841n-v13-squashfs-tftp-recovery.bin http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tl-wr841n-v13-squashfs-tftp-recovery.bin] | |||
Aktuellen Link siehe [https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13 https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13] | |||
=== Upgrade === | |||
[http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tl-wr841n-v13-squashfs-sysupgrade.bin http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tl-wr841n-v13-squashfs-sysupgrade.bin] | |||
Aktuellen Link siehe [https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13 https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13] | |||
== Installation == | |||
<pre> | |||
Flash instruction: | |||
Until (if at all) TP-Link fixes described problem, the only way to flash | |||
LEDE image in these devices is to use tftp recovery mode in U-Boot: | |||
Configure PC with static IP 192.168.0.66/24 and tftp server. | |||
Rename "lede-ramips-mt7628-tl-wr84...-squashfs-tftp-recovery.bin" | |||
to "tp_recovery.bin" and place it in tftp server directory. | |||
Connect PC with one of LAN ports, press the reset button, power up | |||
the router and keep button pressed for around 6-7 seconds, until | |||
device starts downloading the file. | |||
Router will download file from server, write it to flash and reboot. | |||
To access U-Boot CLI, keep pressed "4" key during boot. | |||
</pre> | |||
=== Links === | |||
[https://github.com/lede-project/source/commit/24043a0d2e01b9843c0dc529205b3b0bc7ecbbf9 https://github.com/lede-project/source/commit/24043a0d2e01b9843c0dc529205b3b0bc7ecbbf9] | |||
== Links == | == Links == | ||
Aktuelle Version vom 19. Januar 2020, 17:58 Uhr
Noch in Bearbeitung
Download
Installation
Aktuellen Link siehe https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13
Upgrade
Aktuellen Link siehe https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13
Installation
Flash instruction:
Until (if at all) TP-Link fixes described problem, the only way to flash
LEDE image in these devices is to use tftp recovery mode in U-Boot:
Configure PC with static IP 192.168.0.66/24 and tftp server.
Rename "lede-ramips-mt7628-tl-wr84...-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
Router will download file from server, write it to flash and reboot.
To access U-Boot CLI, keep pressed "4" key during boot.
Links
https://github.com/lede-project/source/commit/24043a0d2e01b9843c0dc529205b3b0bc7ecbbf9
Links
https://openwrt.org/toh/tp-link/tl-wr841nd
https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13
Zurück zu OpenWRT